AEG 320F-DGB/611251911 Cooker Problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG 320F-DGB/611251911 Cooker Problem

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 26, 2018 at 7:37 pm #94319
    jontymox
    Participant

    Good evening all,

    Wondering if anyone has a wiring diagram or advice relating to a problem on the above cooker?

    Essentially, I was called to a no heat fault in the fan oven.

    Upon inspecting the element had clearly failed, so I renewed the element.

    However, when the element blew it must have short circuited, as upon renewing it, the fault remains. (No power to element, bulb, or re-circulation fan.)

    Having had a pretty good look, all is well with the wiring, although I could do with a wiring diagram, as I suspect a switch or regulator fault, even though they appear fine.

    Any help appreciated.

    jonty

    July 26, 2018 at 8:28 pm #457008
    aqualectric
    Participant

    Re: AEG 320F-DGB/611251911 Cooker Problem

    Check the clock is set to manual, if OK, loop out the clock relay. If not then selector switch has a blown switch terminal.

    July 26, 2018 at 8:33 pm #457009
    jontymox
    Participant

    Re: AEG 320F-DGB/611251911 Cooker Problem

    Thanks Aqualectric,

    Will do, and update you.


    Kind regards,

    jonty

    July 26, 2018 at 9:29 pm #457010
    Hollytree_Technical
    Participant

    Re: AEG 320F-DGB/611251911 Cooker Problem

    Here you go.

    Jem

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.