Beko DWD W 4310

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko DWD W 4310

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 3, 2018 at 4:49 pm #94567
    RCA
    Participant

    Hi.
    The drying element in this Beko dishwasher does not switch off leading to overheating in the cabinet and lots of steam on opening the door.

    How to proceed please?

    Thanks in anticipation.
    Rob

    September 3, 2018 at 7:53 pm #457719
    electrofix
    Moderator

    Re: Beko DWD W 4310

    chances are the relay that controls the heater on the controller has fused stopping the heater turning off

    https://shop.ukwhitegoods.co.uk/1899450 … ontrol-pcb

    this should be the correct card for your machine

    am assuming correct model should be DWD4310W not as above

    Dave

    September 3, 2018 at 9:37 pm #457720
    RCA
    Participant

    Re: Beko DWD W 4310

    Many thanks Dave.
    Yes, W at the end.
    Will order up the PCB.
    Thank you for the prompt reply.
    Rob

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.