- This topic has 3 replies, 2 voices, and was last updated 7 years, 5 months ago by
.
-
Posts
-
Hi all
Does anyone know what E17 is on this machine please – All of the components appear to be working and it passes insulation test with flying colours so I may be forced to play parts bingo with it if no one knows.
Thank you
Jem
Thank you Dave – the one time that I dn’t think about the owners manual and it has the code in it.
Seeing as both valves work and it fills to what I suspect to be the correct level before it stops I may have to try changing the analogue pressure switch.Jem
This machine is being awkward – I have tried changing both the valves and the pressure switch with no change.
The one thing that I have noticed is that it seems to work okay on a cotton wash but always fails on a mixed load cycle.
It also turns out that I am the second engineer to look at this machine and that it may already have a new power module (I am not certain if they were trying to fix the same issue or a different one – the old lady who owns it only knows that it doesn’t work but doesn’t remember the original issue).
Do the power modules require some form of configuration or are they pre programmed?
Any other ideas as to what may be the cause?Jem
- You must be logged in to reply to this topic.