Hotpoint Thermostat ET51001/J5 Compatability Question

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint Thermostat ET51001/J5 Compatability Question

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 20, 2018 at 12:08 pm #95032
    laurenceuk
    Participant

    Hi,

    Customer was sent the above stat (see photo1) as a replacement for the stat fitted in a
    Hotpoint range cooker 35232 ser. 711190074 convection oven. It is to replace a 2 tag
    and earth type stat (see photo2). The replacement has 3 sets of tags(A,B,C) and earth. Is
    it a compatible replacement? Is there a wiring convention for it as all three tags become live
    ie that is all in circuit together, when stat switched on and all open circuit when off? Can I
    just pick any set of two?

    This machine isn’t listed in Partfinder, is it badged?

    If anyone could give guidance, would be appreciated.

    Thanks
    Laurence

    November 20, 2018 at 1:12 pm #459159
    murv
    Participant

    No information on this model but the thermostat terminals on the replacement stat are listed as A-B

    November 20, 2018 at 9:33 pm #459160
    electrofix
    Moderator

    bit of a guess here but

    there are 3 contacts so there will poss be

    common terminal

    a terminal that switches permanent live to feed a fan motor

    and a temp controlled terminal to feed an element


    try heating up an oven and get the probe hot and see if 1 term switches off

    dave

    November 20, 2018 at 11:11 pm #459161
    electrofix
    Moderator

    Went to

    https://parts.hotpoint.co.uk/

    put in 35232


    site comes up with

    EG1000EX(T)


    from diagrams

    main oven stat shows as J00158677 which is

    c00193863


    see what you think

    Dave

    November 21, 2018 at 10:26 am #459162
    murv
    Participant

    ET51001/J5 Connection Data
    Common=A
    Element=B
    Fan=C (Where used)
    Listed Temperature 230C (UNCONFIRMED)

    Are there any specifications or codes on the old thermostat?

    Kind Regards, Murv.

    November 23, 2018 at 3:31 pm #459163
    laurenceuk
    Participant

    New forum first experience this and was waiting for an email to inform me on responses.
    Glad I popped back in to check.

    Thanks everyone for your tremendoud input. Lots of useful info. Murv will give this a go.

    Thanks again, so very much appreciated.

    Laurence

    November 23, 2018 at 8:44 pm #459164
    electrofix
    Moderator

    you can get email notification but you have to set it in your user profile

    Dave

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.