- This topic has 2 replies, 3 voices, and was last updated 7 years, 4 months ago by
.
-
Posts
-
Hi gents cycle pump fitted now the drain pump stays on start a rapid wash does wash heats up does rinse then hot rinse drains then flashing 4 time cancel programme and it pumps out for ever until you tiurn it off not had this before anyone help me please as i suspect relay on board sticking or no signal to turn relay off where does the signal come from pressure switch in sump of dishwasher as that seems to click ok or any tech that would help me would do cheers alro
This is usually the water indicator in the sump of the machine when I get this fault. Most of the time its just stuck with congealed fat to something similar. Easiest way to tell if its stuck on full is to get something very thin and poke it through gently onto the diaphragm and listen for a click. If you can’t hear one its either gunked up or faulty.
- You must be logged in to reply to this topic.