CDA RC9020 Lower element replacement

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › CDA RC9020 Lower element replacement

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 8, 2018 at 8:33 am #95129
    James Staton
    Participant

    Hello,
    i have a CDA RC 9020 range oven and I am trying to replace the lower element. I’ve removed the back panel and side panel and still can’t find how I get into the compartment to replace the element. Does anyone have any ideas?

    December 8, 2018 at 10:46 am #459473
    electrofix
    Moderator

    assume you have checked the oven floor is not removable

    Dave

    December 8, 2018 at 11:28 am #459474
    kwatt
    Keymaster

    Follow the wires, they’re sometimes buried behind the insulation. 😉

    K.

    December 8, 2018 at 3:33 pm #459475
    James Staton
    Participant

    Yeah I tried the floor and it doesn’t seem to have anything to release it. Could it be one of the screws on the back? I can release the element from the two screws at back but I have no idea how to get it out.

    December 13, 2018 at 10:12 pm #459476
    electrofix
    Moderator

    to finish this one off. as far as I can see its Delonghi built and I have just done the same job tonight so method as follows


    undo screws yellow and loosen or remove screws red

    the floor under the element can be removed from the storage area underneath


    the element can now be removed and replaced and refit parts in reverse order

    Dave

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.