- This topic has 2 replies, 2 voices, and was last updated 7 years, 3 months ago by
.
-
Posts
-
When switched on my dishwasher start sequence; 1. dishwasher drains 2. Solenoid opens and water flows into dishwasher 3. 1 & 3 lights flashes 4. Dishwasher drains. Lights remain flashing? Can you help. Thanks
Mesh plate, filter or microfilter, pressure switch,
circulation pump.Sadly in most cases this is a main circulation pump/motor failure, quite common on Indesit made appliances.
Thanks iadom for your quick response and pointing me in the right direction. Checked dishwasher today and found the pressure switch pipe blocked, used a bicycle pump to unblock. Run machine and it ran for a longer time before the two light flashed, cleared the pipe again and the machine carried out a complete rinse cycle. Obviously there is stil debris in the bottom 0f the dishwasher filter area, once the machine has completed a complete wash sequence i will add a cleaning agent. Once again thank you and have a good Christmas.
- You must be logged in to reply to this topic.