Beko dishwasher not heating water

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko dishwasher not heating water

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 31, 2018 at 1:18 pm #95219
    Roady27
    Participant

    Hi,
    I have a Beko DIN15210 dishwasher that has stopped heating water. Having replaced the flow through heater and thermal sensor, as well as checked the wiring I have looked at the PCB. There’s a HF3FA relay, is this the relay that controls the heating circuit? It’s cheap to replace and I was wondering if it’s worth a go before I give up!
    Many thanks in advance.

    January 2, 2019 at 5:30 pm #459722
    electrofix
    Moderator

    I would say yes give it a try as the relay is for the heater. Have a good look at the relay soldered joints first as these can be a source of failure as well

    Dave

    January 17, 2019 at 10:41 am #459723
    Roady27
    Participant

    Well….relay replaced and still no hot water. I’m at a loss as to what the problem is ‍♂️

    January 17, 2019 at 2:07 pm #459724
    electrofix
    Moderator

    i assume you have checked for wiring breaks after that its a board problem

    have had a few older board with power supply issues. where the voltage on the board was enough to start the machine but not quite enough to pull in the heater relay

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.