Hotpoint FDAL11010

Home › Forums › Trade Technical & Spare Parts Forums › Hotpoint FDAL11010

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 8, 2019 at 3:21 pm #95264
    chuffy
    Participant

    Aborts programme at random times. When it does the on/off, salt and rinse aid lights flashing.
    Also start, wash and end lights on.
    Any ideas?

    January 8, 2019 at 4:35 pm #459829
    iadom
    Moderator

    Possibly the same as the FDL codes, lights 1+3+4 = ‘non operative module’. 🙁

    January 8, 2019 at 9:47 pm #459830
    chuffy
    Participant

    Thanks for the response but this model only has 3 lights that run vertically on right hand side of fascia.
    wash,dry and end! So it’s the top (wash) and bottom (end) lights that are lit along with the adjacent start button.
    At the same time the salt, rinse aid and on/off lights which are situated on the left hand side of the fascia are flashing.

    January 8, 2019 at 9:58 pm #459831
    iadom
    Moderator

    Ignore the on/off, salt and rinse aid lights, the start button is one of the four lights used for error codes plus the other three, the lights you say are flashing are 1+3+4. Error E11.

    See here. https://www.ukwhitegoods.co.uk/help/…er-fault-codes

    January 10, 2019 at 1:14 am #459832
    chuffy
    Participant

    Many thanks …..slightly confusing but I do understand now.
    Another job to walk away from.
    Cheers.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.