- This topic has 2 replies, 2 voices, and was last updated 7 years, 3 months ago by
.
-
Posts
-
Hi my Door Locked led and Extra Rinse led are rapidly flashing. If try and set a program it just spins then stops. Instruction Manual says if this happens to get technical assistance.
It also tripped out my electric.
How much is a new circuit board/control panel for one of these.Why do you want to know the cost of a main circuit board?( Very expensive and need programming with a £20 smart card and. £150 card reader).
Whilst the board itself can be damaged by something tripping the electrics it is rarely the cause of this, main motor and heater far more common causes of tripping. For error codes the lights don’t flash rapidly, they blink steadily.
Just checked and if your lights are flashing steadily the fault code is F01 which is a main board fault. Just checked and they are £125 plus of course the £20:00 for the smart card and the £151:00 for the card reader. There are companies who will repair these modules but there is a strong possibility that a fault on the motor has blown the board.
- You must be logged in to reply to this topic.