hoover paddles

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover paddles

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 14, 2019 at 10:57 am #95304
    wilf
    Participant

    hoover WMH147DF/2-80 I’ve seen a post somewhere before but I cant find if Two paddles broken and hanging on their screws this is a slim depth machine and when the sump hose is removed to access the fixing screw it is about 1 inch out of line with the sump flange. How do you carry out this job?

    thanks wilf

    January 14, 2019 at 11:49 am #459965
    electrofix
    Moderator

    according to hoover its a “Drum Shovel”

    from the few I have fitted they lock in without the screws

    Dave

    January 14, 2019 at 5:23 pm #459966
    pmb
    Participant

    I have pulled loose paddle away and grabbed screw with pliers and pulled out, then fit paddle without screw , making sure it clicks in place.

    January 14, 2019 at 7:29 pm #459967
    Grendal
    Participant

    Is there a breather hose at the top ? Think you do it through there

    January 15, 2019 at 7:50 am #459968
    wilf
    Participant

    no, breather hole is too far forward I think its a case of fitting without screws but as there are no fixings close to the front this could cause trapping I will advise customer first

    wilf

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.