Zanussi washer dryer….Which board?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi washer dryer….Which board?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 28, 2019 at 10:12 am #95396
    trotter
    Participant

    Zanussi model number ZKG7165 is displaying E66 error code. Customer can use cool washes but when using 90 wash the machine cam up with this error code (E66) however it happens all the time on drying cycle as follows…… Machine tumbles, takes in water, pauses then as soon as fan motor should kick in one of the valves opens and machine fills with water.

    I understand E66 is heater relay stuck in closed position but not sure which board this is on, the small dryer PCB or the main control PCB. Any input much appreciated!!

    January 28, 2019 at 8:22 pm #460249
    electrofix
    Moderator

    E66 is a wash heater error if it was the dryer side it would be a different error code

    assume wash heater heats ok but has it got an earth fault ?

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.