Ceramic hob cabling

This topic has 4 replies, 2 voices, and was last updated 7 years, 2 months ago by Malbut.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
February 1, 2019 at 2:29 pm #95419

Malbut
Participant

Have a cooker point but need to cable in a ceramic hob. What flexible cable should I specify?

February 1, 2019 at 2:33 pm #460292

electrofix
Moderator

depends on the hob but it should be in the fitting instruction and some hobs come pre wired

Dave

February 1, 2019 at 2:47 pm #460293

Malbut
Participant

Thanks.
It’s a Beko HCC64103 with total power load of 5.8 kW. No cable fitted. About .75m required. Would 3183TQ immersion cable suit? [h=1][/h]

February 1, 2019 at 3:11 pm #460294

electrofix
Moderator

the cable recommeded by Beko is H05V2V2 which has a heat rating up to 90 degrees http://www.powercabwires.com/HO5VV_F.php

immersion heater heat resisting cable is also rated to 90 degrees https://www.screwfix.com/p/nexans-heat-resistant-flex-3183tq-3-core-2-5mm-5m-white/8869t

so i would say yes it will be fine

Dave

February 2, 2019 at 9:59 pm #460295

Malbut
Participant

Many thanks,
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.