- This topic has 4 replies, 2 voices, and was last updated 7 years, 2 months ago by
.
-
Posts
-
Potential bearings job on a Miele W562. Anyone know the difference between a 35x76x10/18 and a 35x76x10/14 bearing seal?
Parts list says that machine needs 35x76x10/18 (part no 4385974) but it’s proving difficult to find. This site sells a bearing kit with a 35x76x10/14 seal. I’ve seen pictures of both but can’t really tell the difference. What does the last 2 digits refer to?For a standard R23 double lip seal 35x76x10/14
35mm inner diameter
76mm outer diameter
10mm outer depth
14mm inner depthThe genuine seal is not a standard R23 type. It is marked as 18mm thick but this may be the total depth taking the extra stepped rubber flange into account.
Murv…
Unfortunately I have not seen a Miele bearing job, Way too expensive for my customers.
Just guessing from a picture of the genuine seal kit (part no. 5387003) The deeper (flanged) oil seal may be used to provide the pressure on the tank/spider gasket. If this is the case then the tank/spider gasket is likely to leak.
Difficult to say more without strippling the job down to see what the flanged genuine seal does.
Murv..
- You must be logged in to reply to this topic.