- This topic has 4 replies, 2 voices, and was last updated 7 years, 1 month ago by
.
-
Posts
-
I bought a bush washing machine WMNSN612W 2 weeks ago, I’ve tried to use it and adjust the temperature, as the manual says you can do, but the led light automatically goes back up to 60, regardless of what temperature I’ve put it on. I’m not sure if it is faulty, but have seen a few others with this issue, would appreciate any advice or help anyone can offer
[h=1][/h]if any machine has a temp adjustment some you can set at say 40 and it will stay there. Others will default to the programmed temp every time you select the programme and the user has to lower it each time. it should then do this programme using the user set temp but only for one wash
Dave
If i put it on say a 40 cotton wash, the led temperature still shows as being on a 60, not 40. Same as if I put it on a rapid 15, still shows up as being a 60 degrees wash, and I’m never sure what temp it’s going to wash things on
sounds like the programme selector is not changing programmes. if you select just a spin programme or a rinse does it just do that programme or does it wash and heat every time ?
Dave
- You must be logged in to reply to this topic.