Siemens WM12B180GB/07 E19

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WM12B180GB/07 E19

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 20, 2019 at 7:03 am #95630
    Twoten
    Participant

    The above machine is permanently displaying E19.
    The only information on an E19 code for a BSH washing machine is this: https://www.neff-home.com/uk/service/support/121_washers_dryers/errors/e19-or-f19 “
    “Error E19 / F19 Heating time exceeded”

    The element and wiring loom checks out OK. As I get the error immediately I cannot check for power at the element. The power module looks OK.

    I have checked the other components in the machine and can’t find any other problems so am thinking this is most likely a fault with the power module.

    AS this error comes on as soon as the machine is switched on can it be reset?

    Is there anything else I may have missed?

    March 21, 2019 at 7:13 pm #460900
    keithwilliams
    Participant

    this is a shot in the dark. i have twice been to a whirlpool washer which instantly threw up a heating related fault. closer inspection revealed the heater relay on the pcb had stuck in the on position. never had this on a bosch but theres always a first time i suppose.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.