White Knight condenser B96G8W sensing rods error

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › White Knight condenser B96G8W sensing rods error

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 5, 2019 at 3:38 pm #95715
    John Munro
    Participant

    Hi I have two of these machines one doesn’t heat anymore. I down loaded the manual and went through the PCB quick check on both machines. Obviously the working machine returned al the results that was expected.

    The one that does not heat anymore returned only one error . The sensing rods should have returned 1A0 with door shut but returns 11f then jumps to 120 no idea what that is or for that matter what sensing rods are? and will this be preventing heater coming on

    Any help appreciated

    April 5, 2019 at 9:43 pm #461138
    electrofix
    Moderator

    sensing rods as far as I can see sense the moisture of the laundry

    I would check the wiring to the sensors and if there is any leakage

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.