Zanussi washer dryer fault code E73 ZWD71460CW

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi washer dryer fault code E73 ZWD71460CW

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • April 7, 2019 at 11:12 pm #95727
    boselecta
    Participant

    ZWD71460CW
    914603906-00
    60400050

    Zanussi washer dryer, customer says when put on dryer stops after a few minutes but heats ok when tested.

    When I put it into diagnostics it comes up with E73.

    Dry elements, no earth leak. Its the later model without the dry air chamber at the rear.

    Any ideas please?

    April 7, 2019 at 11:46 pm #461178
    electrofix
    Moderator

    there is a bulletin about this one

    Dave

    April 7, 2019 at 11:51 pm #461179
    electrofix
    Moderator

    the rest of the bulletin goes on about how to fit the new harness and re-route the wires


    if you want it let me know

    Dave

    April 8, 2019 at 12:00 am #461180
    boselecta
    Participant

    Thanks Dave, very interesting, I’ll check out the wiring harness

    April 8, 2019 at 12:05 am #461181
    electrofix
    Moderator

    let me have an email will send you the complete bulletin

    Dave

    April 17, 2019 at 7:43 pm #461182
    boselecta
    Participant

    Many thanks for the technical sheets Dave, exactly the fault with the broken blue wires. Another happy customer!

    October 4, 2021 at 5:43 am #461183
    DWSERV
    Participant

    Hi Dave please could you email me the bulletin.

    Thanks in advance.
    Doug.

    October 4, 2021 at 8:36 am #461184
    electrofix
    Moderator

    sorted Doug

    Dave

    October 4, 2021 at 8:33 pm #461185
    DWSERV
    Participant

    Thanks again Dave.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.