Panasonic NA-F70B1 – Blinking Lights

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Panasonic NA-F70B1 – Blinking Lights

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 28, 2019 at 1:47 pm #95923
    potats123
    Participant

    Greetings! New to this forum.

    I recently bought a second hand Panasonic NA-F70B1. Used them a few times and decided to get a new one instead because the inner drum area had some bad odour. I left it there for a couple of months with the cover open to air out any remaining moisture.

    Today, I tried to start it up again in hopes to be able to sell it off to another person. But this time unfortunately, I was faced with a problem.

    I started up to run a cycle. The machine’s pulsator moved and water started to fill in… for a split second. I was then met with blinking lights on all of the water level and the wash/rinse/spin LED lights. I tried another type of program cycle but was met with the same fate.

    Sorry if it wasn’t detailed or it didn’t make sense. Do let me know what is missing so I can fill in the blanks for you.

    Thanks for reading!

    May 28, 2019 at 8:43 pm #461744
    electrofix
    Moderator

    according to the manual if you see this call service. then if you look at some of the workshop manuals it does not tell you how to deal with this situation and only mentions fault codes

    have not had a lot of dealing with Panasonic washers but any I have had have not been too easy

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.