Zanussi ZDC8202P (916097379/00) – 15 flashes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDC8202P (916097379/00) – 15 flashes

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • June 10, 2019 at 11:07 am #95979
    Hollytree_Technical
    Participant

    Hi all

    Does anyone know what 15 flashes of the start pause light means on this dryer please?

    I have just received the call but can’t see the code here on the forum and connect don’t have the service manual but I would like to go armed with the information if possible.

    Thank you

    Jem

    June 10, 2019 at 7:31 pm #461948
    baron
    Participant

    I did not met such error before, therefore I do nit know where to guide you…
    but EF6=Safety Reset

    June 10, 2019 at 8:17 pm #461949
    electrofix
    Moderator

    have sent you a lot more info and a lot of reading

    Dave

    June 10, 2019 at 8:28 pm #461950
    Hollytree_Technical
    Participant

    Thank you both – I will find out the truth when I go to see it on Wednesday – Apparently he had put it on “Just Ask” and they have said that it is a faulty board (believe what you will – I suspect otherwise).

    Jem

    June 10, 2019 at 8:36 pm #461951
    electrofix
    Moderator

    it is an odd error
    you have got 15 flashes which is hexadecimal E

    but nearest fault is as Baron says is EF6 which should be 16 flashes so a bit confusing.

    am hoping with info you can put in service mode and see what happens

    Dave

    June 11, 2019 at 6:22 pm #461952
    baron
    Participant

    Sorry Dave but
    A=10 flashes;
    B=11 flashes;
    ………
    F=15 flashes

    June 11, 2019 at 6:25 pm #461953
    baron
    Participant

    And I didn’t found any other error on F familly in this electronic platform.

    June 11, 2019 at 9:17 pm #461954
    electrofix
    Moderator

    baron wrote:Sorry Dave but
    A=10 flashes;
    B=11 flashes;
    ………
    F=15 flashes [IMG2=JSON]{“data-align”:”none”,”data-size”:”full”,”src”:”https://www.ukwhitegoods.co.uk/forums/core/core/images/smilies/icon_cool.gif”}[/IMG2]

    your right I lost it for a minute

    but who knows what they mean by safety reset

    Dave

    June 20, 2019 at 9:27 pm #461955
    Hollytree_Technical
    Participant

    Just to finish this one off, the customer had been trying to put it into diagnostic mode but instead of going to the error code section they were counting the number of flashing lights (15) not the error code.

    When I checked this unit I found that the actual code was E63 (Heater Failure) and that the one shot on the heater was open circuit.

    December 22, 2020 at 12:23 pm #461956
    twicknix
    Participant

    Can I ask for help on this tumble dryer? Randomised fault… sometimes it starts and others won’t and it flashes red three times it beeped between two flashes then 20 flashes and it looped.

    December 22, 2020 at 6:14 pm #461957
    electrofix
    Moderator

    twicknix wrote:Can I ask for help on this tumble dryer? Randomised fault… sometimes it starts and others won’t and it flashes red three times it beeped between two flashes then 20 flashes and it looped.

    have emailed you a manual

    Dave

    December 23, 2020 at 4:17 pm #461958
    twicknix
    Participant

    Thanks Dave

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.