- This topic has 3 replies, 2 voices, and was last updated 6 years, 9 months ago by
.
-
Posts
-
hi i have a problem with this cooker it trips the breaker but has no earth leaks i suspect its the hob plate any one had a similar fault . i generally only replace elements and fan motors so not too familiar with other faults thanks john
well its got to be an earth fault
are you using a multimeter or a megger to try to find it ?
long shot had one where the customer had steam cleaned the hob and it would not stop tripping. used a heat gun to dry plates out, problem solved
Dave
Hi Dave thanks for your response i used a megga i checked all elements , even disconnected the main in and tested live and neutral to earth without any fault showing i thought i could be a low resistance fault on the hob , i noticed it seemed to feel like it was in that area when it tripped as i had my hand on the hob
- You must be logged in to reply to this topic.