- This topic has 7 replies, 2 voices, and was last updated 6 years, 9 months ago by
.
-
Posts
-
Looking at replacing the triple water valves, connect sell the pattern VAL9386….looking at original valves..they plug into a baseplate…what I need to know will the copy ones plug into the baseplate….ie not changing the wiring configuration… John
well this lists all miele part numbers it replaces
Dave
https://shop.ukwhitegoods.co.uk/71ml01-washing-machine-water-valve
Hi Dave, I believe you misunderstood me, I know they are listed for this model, but I believe these are pattern parts if you look at Miele genuine on connect site they show miele original valves don’t have individual spade connectors. the picture show the 3 valves fitted to a type of circuit board and have a multi connector plug not 2 individual spade connectors to each valve..John…
Wanted to know if the connectors on the pattern ones could be inserted onto the circuit board of original or not…
I did guess what you were asking and its very likely it will go on but cannot say for certain
whats wrong with the original valve coil or diaphragm ?
if its diaphragm then on most miele valves you can unscrew the valve stem and swop the rubber from a non gen valve. have done it loads of time and it saves a fortune
Dave
Dave.. I originally got a call from owner telling me it will do the wash cycle then empties, but not taking in the rinse water (fault Inlet problem ) I am assuming valve problem, although I have not seen it yet….
does sound about right.
look in your stock of valves and find one the valve stem unscrews. (some do some don’t) take it with you and if coil ok you can just swop the rubber as most Miele valves do unscrew
Dave
- You must be logged in to reply to this topic.