Changing Bosch WFF 2001 dampers

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Changing Bosch WFF 2001 dampers

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 20, 2019 at 3:33 pm #96161
    JohnWB
    Participant

    I need to change the dampers on my Bosch WFF 2001 washing machine so I bought a pair from UK Whitegoods thinking it would not be to difficult.

    So far I have removed the top and the 3 screws by the Powder dispenser but i cannot see any way to remove the front where i believe the dampers are located.

    Can someone please give me some advice as to what to do next please or let me know where a write up or video can be found please.

    July 21, 2019 at 8:16 am #462531
    Martin
    Participant

    So far so good then. All you need to do now is to removed the bottom plastic access panel to reveal the 2 screws that hold the front panel in place. Then release the door seal front retaining spring, unhook the door seal from the front panel and the front panel should ease off and clear. Viola!

    July 21, 2019 at 11:00 am #462532
    JohnWB
    Participant

    Great, i’ll give that a try, thanks very much

    July 25, 2019 at 7:21 am #462533
    andyjawa
    Participant

    There should be a T20 threaded screw that holds the metal front panel to the right of the soap dispenser too. Usually rusted !

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.