- This topic has 1 reply, 2 voices, and was last updated 6 years, 8 months ago by
.
-
Posts
-
Advice please – We have the above washing machine and it keeps stopping mid cycle. I clicks but the fault seems to be that it doesn’t let water into the machine. I have cleaned the inlet filters and used switch cleaner on all visible contacts on the PCB. I was wondering if it may be the inlet relay (I presume that is what it is) not operating properly and stopping the flow. The machine has hot and cold inlets. Any help really would be appreciated – Thanks in advance – Chris
well the first thing i would do is check the inlet valve coils.
being a hot and cold fill its likley it fill up with hot water only as the cold valve may be faulty. but it needs the cold valve when it get to the rinses so stops
you may well find if you try the fabric conditioning rinse it would work as it uses a 2nd coil
Dave
- You must be logged in to reply to this topic.