- This topic has 3 replies, 2 voices, and was last updated 6 years, 7 months ago by
.
-
Posts
-
Good evening
My fridge door has a dent in it on the right edge. I’m wondering if I can get a replacement door? Does it have to be the whole door or is it made up of individual parts so therefore you could replace just the outer skin? Sorry if that sounds daft! If can get replacements is it easy to do or would I need expert fitting? I’ve looked in spares on this site and others and can’t even find my model
Cheers
Paul
I would say its a complete door to replace, not sure on your unit but all the units ive worked on you need to unbolt the door at the hinge underneath and it drops out, to replace you just push new door into place and then bolt in. on larger units you may have a top and bottom hinge to unscrew to drop the door off.
TrickyRikki88 wrote:I would say its a complete door to replace, not sure on your unit but all the units ive worked on you need to unbolt the door at the hinge underneath and it drops out, to replace you just push new door into place and then bolt in. on larger units you may have a top and bottom hinge to unscrew to drop the door off.
Thanks mate. It has all fancy controls on the front so imagine it’s got some form of wiring?. I’ve made enquiries with a few spare parts companies and so hopefully will find out this week whether I can get the door.
psej71 wrote:
Thanks mate. It has all fancy controls on the front so imagine it’s got some form of wiring?. I’ve made enquiries with a few spare parts companies and so hopefully will find out this week whether I can get the door.
I would assume the controls and lights will have a small wiring loom that is fed through the top hinge possibly, i have seen that on commercial units, hopefully you get it sorted
- You must be logged in to reply to this topic.