Deluxe hygena oven

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Deluxe hygena oven

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • October 6, 2019 at 4:50 pm #96494
    Crazycatperson
    Participant

    Hi, just wondering if anyone has a very old Deluxe by hygena electric oven? The handle is loose on one side and I’m not sure how to tighten it as there are no visible screws. Please help! TIA

    October 7, 2019 at 12:51 am #463581
    kwatt
    Keymaster

    The model number is needed, often on the top panel so it’ll need pulled out to see that.

    K.

    October 12, 2019 at 9:34 am #463582
    Crazycatperson
    Participant

    Hi, thanks for the reply. Sorry it took so long to get back to you but I found the original manual. It’s a conventional oven AHY 3110 mocca colour.
    Thanks

    October 12, 2019 at 12:32 pm #463583
    kwatt
    Keymaster

    This is how the door fits together on that model.

    K.

    October 12, 2019 at 1:41 pm #463584
    Crazycatperson
    Participant

    Thanks, but still not sure how to get to it. It’s number 67 that’s loose. That part of the handle is coming away. How do I tighten it? Thanks

    October 12, 2019 at 1:43 pm #463585
    kwatt
    Keymaster

    It’s a screw to the handle that holds it through the glass, at the bracket.

    K.

    October 12, 2019 at 1:52 pm #463586
    Crazycatperson
    Participant

    So do I have to take the whole door apart just to get to it? Please tell me that I don’t. I’m scared if forcing bits apart and breaking the door. Maybe old, but still working at the moment

    October 12, 2019 at 1:59 pm #463587
    kwatt
    Keymaster

    No idea, without being onsite looking at it.

    Probably the inner glass will need to be removed to see it.

    K.

    October 12, 2019 at 2:07 pm #463588
    Crazycatperson
    Participant

    No, not that as I took the glass out to clean it.

    October 26, 2019 at 11:06 pm #463589
    Crazycatperson
    Participant

    Hi, many thanks for your help. I took the glass out as you said. I unscrewed the 3 screws holding the long bracket in. 1 screw holding the metal plate on. There it was under that. Screwed it up and put it all back together. Less than 10 mins tops. Thanks again

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.