- This topic has 5 replies, 3 voices, and was last updated 6 years, 5 months ago by
.
-
Posts
-
I have a fault where the “cooling down” led flashes and the bleeper sounds constantly. Possible NTC problem? I suspect either the heater thermistor, or I gather there is one that is somewhere at the front which may be the more likely one to be faulty. Any help greatly appreciated. Cheers. Steve.
see page 30 owner manual
https://www.manualslib.com/manual/825421/Miele-T-8812-C.html?page=30#manual
Dave
Many thanks Dave. The filters are clean and I cleaned the condenser base out when I was there. They are away until the 23rd so I will double check. Thank you for your assistance. Steve.
:mad:Update 25-11-2019.
Checked out all possibilities and could find no reason for the continuous bleeping. The dryer was working ok apart from that. I turned the bleeper off and all seems ok. Not strictly satisfactory but time will tell. Thank you so much for your help. Steve.:mad:;)
- You must be logged in to reply to this topic.