- This topic has 3 replies, 3 voices, and was last updated 6 years, 5 months ago by
.
-
Posts
-
Hi please help..
I have a smeg A2 that recently had a broken oven selector switch
i have had it mended but the guy who did it said the part had been changed and the rod in the middle that turns the switch to different oven settings is
not as long .. which means the oven knob now sits flush with the control panel instead of about 3 mm proud like all the other knobs.
i questioned this and he says it’s just how they are now and that it is the genuine part .
is this true or have I just been fobbed off by the repair man?don’t know for definite but to check the correct part would need all the info off the rating plate
did the engineer leave the packaging the switch came in with the part no on ?
Dave
You are probably long gone, but in case anyone else is searching on this issue, yes the shaft is now shorter on a SMEG A1-2 selector switch as well. The SMEG shaft extension is no longer available but you can find suitable extensions if you search.
I found one on ebay. “EGO 47.72018.000 SWITCH SHAFT SPINDLE KNOB SHAFT EXTENSION 18mm 28mm”
https://www.ebay.co.uk/itm/EGO-47-72…0/142343731671
I had to cut the extension shaft on this down to 10mm length that goes into the knob, so when fitted it provides 11mm of extension to the 31mm shaft of the new selector switch giving a total length of 42mm. The original length was 40mm so the knob will be only 2mm proud. I added a 2mm spacer between the selector switch and the cooker front panel to make the fit exact!Without the shaft extension the knob is likely to fall off or break after a while.
- You must be logged in to reply to this topic.