Bosch Classixx 6 flashing light combination not in manual

This topic has 1 reply, 2 voices, and was last updated 6 years, 5 months ago by binsley.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
November 5, 2019 at 10:20 am #96674

binsley
Participant

Our machine has never failed before but won’t start today, instead it rapidly flashes three lights: Spin + Wash + Rinse stop. The manual doesn’t list this combination, it just says “Other fault codes are intended exclusively for the after-sales service”…but as the machine is seven years old, so well out of warranty, to me that’s manufacturer-speak for “Machine isn’t worth repairing, junk it and buy a shiny new one”…any other thoughts?

November 5, 2019 at 10:33 am #464413

electrofix
Moderator

bosch fault codes are hard to find but the most common one we get is brush failure know on some machines as F21

at 7 years old I would expect a brush failure and it should be worth doing. done 2 this week one on a 10 year old machine

on average use we expect brush failure at 5 to 7 years

Dave
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.