Beko WMB 10 W- Not draining

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko WMB 10 W- Not draining

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 13, 2019 at 6:52 pm #96726
    Grumps
    Participant

    Hi.
    Problem started with washing machine today. Not draining on either of the Spin settings or the Drain setting. I presume pump has failed unless there is another known fault.

    We normally hear the machine empty into the sink U bend. Now. No sounds whatsoever. Front filter is clear – it was full of water!

    I’ve looked at the listed spares and none seem match this particular model – is it THAT old that spares are no longer available?

    What is involved in changing the pump? I am an Engineer but in a different field.

    Alternatively, any recommendations for a replacement machine please? Two person household.

    Thanks.

    November 13, 2019 at 11:28 pm #464600
    electrofix
    Moderator

    you took out the filter but did you check the pump impeller for obstructions

    Dave

    November 14, 2019 at 12:05 pm #464601
    Grumps
    Participant

    electrofix wrote:you took out the filter but did you check the pump impeller for obstructions

    Dave

    Thanks for taking the time to respond. I rotated the impeller mechanically a couple of times. It did seem a bit stiff. I then set the machine to Drain and observed the impeller spinning.

    I then gave it a liberal spray of silicone lubricant so hopefully some will have got onto the shaft.

    Machine now working.

    The missus ain’t best pleased. She is the proverbial ‘doom-monger’ and wanted a new machine.:p

    Again.

    Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.