- This topic has 2 replies, 2 voices, and was last updated 6 years, 4 months ago by
.
-
Posts
-
Hi, the seal has perished on this washer dryer we own, and as the part is only £50 and I’ve been quoted £150 to replace it, I was going to do it myself! Can’t seem to find any information online though about this particular model, although have found a video which is similar for an AEG. Is it likely to be much different? Or can I assume fitting in the same way i.e. without taking the top and front panels off would be ok?
Thanks
chance are you wont fit this without taking the front off
price you have been quoted sound a bit steep as it seem to be over £100 for labour
try
https://www.ukwhitegoods.co.uk/search/find-an-appliance-engineer
to see if any of our trusted members are close to youpart number of boot is 778589
from site shop
https://shop.ukwhitegoods.co.uk/00686730-washer-dryer-door-seal-gasketor from Bosch (£42.29) direct go here
https://www.bosch-home.co.uk/customer-service/care-protection-and-parts/spare-parts
even if you get the part most engineers wont have a problem with that but if the part fails for any reason other than bad fitting its your responsibility
Dave
electrofix wrote:chance are you wont fit this without taking the front off
price you have been quoted sound a bit steep as it seem to be over £100 for labour
try
https://www.ukwhitegoods.co.uk/search/find-an-appliance-engineer
to see if any of our trusted members are close to youpart number of boot is 778589
from site shop
https://shop.ukwhitegoods.co.uk/00686730-washer-dryer-door-seal-gasketor from Bosch (£42.29) direct go here
https://www.bosch-home.co.uk/customer-service/care-protection-and-parts/spare-parts
even if you get the part most engineers wont have a problem with that but if the part fails for any reason other than bad fitting its your responsibility
Dave
Hi Dave, great advice. Thanks.
- You must be logged in to reply to this topic.