Bosch SMV50E00GB/31

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SMV50E00GB/31

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 19, 2019 at 7:31 pm #96914
    Toni
    Participant

    Hi, the door on this dishwasher just wont stay shut
    I have replaced the latch and switch, the door springs look ok, but its just pops open
    It was badly installed so I re-installed properly but still no luck
    Am i missing something or has anybody any ideas on this please ?

    December 19, 2019 at 9:06 pm #465356
    Specialist01269
    Participant

    Is power to the interlock constant when in use or does it drop out ?.

    December 19, 2019 at 10:27 pm #465357
    electrofix
    Moderator

    have you check the hinge bearings are there ?

    part no 165296

    Dave

    December 20, 2019 at 9:15 am #465358
    ray.t
    Participant

    Hi, I had one like this a while ago and found the plastic that the door lock fits into had slightly gone out of shape and had bowed up in the center. I lowered the dishwasher and used a packer above the lock then re-fitted the dishwasher and all was good.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.