Whirlpool FSCR10437 washer

This topic has 2 replies, 2 voices, and was last updated 6 years, 3 months ago by rocker.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
December 21, 2019 at 9:40 am #96921

rocker
Participant

There is water leaking from soap dispenser ..removed and checked for blockage also hose to tub…reduced water pressure to slow flow still leaks….the water jets near front of draw seem to be the problem..but not sure…any advice…Cheers John

December 21, 2019 at 10:49 am #465400

electrofix
Moderator

if there is no blockages you may have to try changing the draw housing and see if it cures it

Dave

December 21, 2019 at 1:15 pm #465401

rocker
Participant

Had the same problem last week a Panasonic changed dispenser..didn’t work..but will give it a try. !! cheers John
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.