Zanussi ZWF1221W

Home › Forums › Trade Technical & Spare Parts Forums › Zanussi ZWF1221W

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • January 1, 2020 at 12:24 pm #96963
    A1TEC
    Participant

    Hi guys, can any one forward me a a service manual for the zanussi zwf1221w.
    Thanks in advance.
    John.

    January 1, 2020 at 1:33 pm #465630
    electrofix
    Moderator

    should be no probs

    will need Pnc numbers as there are 12 machines with this model

    and email address

    Dave

    January 1, 2020 at 3:11 pm #465631
    A1TEC
    Participant

    Thanks Dave, will be picking the machine up on Sunday, will get it then, ebay buy for a tenner, just can’t help my self. lol.

    January 1, 2020 at 7:03 pm #465632
    electrofix
    Moderator

    I know just bought a neff convection microwave for £5.50

    cant lose at that price

    Dave

    January 7, 2020 at 3:26 pm #465633
    A1TEC
    Participant

    pnc 914521001 if you can help Dave.

    January 7, 2020 at 8:14 pm #465634
    electrofix
    Moderator

    well its down to three machines . is there another 2 digits after that pnc

    Also need email add

    Dave

    January 7, 2020 at 8:56 pm #465635
    A1TEC
    Participant

    Yes just noticed in the very long number below the bar code there are two 00 following that number, email martinappliancecare@gmail.com
    Cheers
    John.

    January 7, 2020 at 9:18 pm #465636
    electrofix
    Moderator

    sorted

    check email

    Dave

    January 7, 2020 at 9:23 pm #465637
    A1TEC
    Participant

    Thanks Dave you are a star, checked diagnostic earlier from what I could remember and got E54 if I counted correctly, not heating.

    John.

    January 7, 2020 at 9:26 pm #465638
    electrofix
    Moderator

    e54 seems to be motor relay problems

    Dave

    January 7, 2020 at 9:27 pm #465639
    A1TEC
    Participant

    Would that cause it not to heat though? clamped the heater no voltage down to heater and not drawing amps.

    January 7, 2020 at 10:05 pm #465640
    electrofix
    Moderator

    if the fault occurs before the heating phase then I assume its programme abort

    apart from that no reason why it should have any effect on the heater

    Dave

    January 8, 2020 at 6:12 am #465641
    A1TEC
    Participant

    Thanks Dave, I will give it a good going through later today,

    January 8, 2020 at 4:02 pm #465642
    A1TEC
    Participant

    It heats better when not on the economy setting.

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.