- This topic has 7 replies, 4 voices, and was last updated 6 years, 3 months ago by
.
-
Posts
-
Looking for some help or information got a new Hotpoint washing machine the other week and keep getting a flashing H20 warning light and beeping when in use a 45 minute wash is taking a lot longer
that warning is to do with filling
check tap it on, check for kinks in hoses, make sure its on the cold water main and not a tank
do you have adequate water pressure ?
Dave
100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} on the cold water main I will check for links thanks very much
As Dave says check the water flow, sometimes the plastic taps jam and the plastic bit turns but the tap is not opened correctly. Take the pipe off the back of the machine and put the end into a bucket then turn on tap to see what the outflow is like.
Hi John. Don’t suppose it was a NSWR 963C was it? I have similar flashing H20 occasionally although waterpressure high. Only just joined forum as I have other problems, like times on washes which are already very long increasing several times during wash and also having to do an extra spin as despite 1600 rpm washing is still more than damp. D you have similar problems?
- You must be logged in to reply to this topic.