- This topic has 7 replies, 2 voices, and was last updated 6 years, 2 months ago by
.
-
Posts
-
Having problem sourcing oven door seal
mode – ZCG561FW
TYPE – DG56E402E0402
SERIAL – 14301432
PNC – 14301432
The replacement supplied is Electrolux part number 4055188132
but that is too big
Holes for fixing clip are 395 mm distance top and bottom
350 mm distance sides
Electrolux parts cannot help
Any ideas???looked up part numbers and they are correct
there are 3 ovens with same model but the early part no of 50298406005 is superseded by 4055188132
I assume you are talking about the lower main oven
Dave
unfortunately they don’t give a size in the seals
in the spares listing its just described as
Sealing,bottom,oven doorDave
the only other thing I can suggest is
https://shop.ukwhitegoods.co.uk/catalogsearch/result/?q=universal+oven+seal
Thanks Dave have fitted universal seal to to-day but no good it was not thick enough as when fitted with door closed it did not grip a piece of paper.
Steve.
Does anybody out in the ethernet have the measurements ?
The three ovens have a PNC with 00 02 or 03 at the end
Mine has nothing and according to electolux the part code
change is for the same product.
Can only assume mine is a small oven.
I am loathed to change the cooker just for a seal.
HELPmakes no sense does it
you have the correct part number but no way of fitting the part as it is too big
I assume your Pnc number is 948905409
how much bigger is the seal you have got ?
dave
- You must be logged in to reply to this topic.