indesit wixl123s issue

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › indesit wixl123s issue

Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • January 21, 2020 at 12:49 pm #97082
    Soulfly83
    Participant

    My indesit wixl123s wont spin. It fills with water then soon as it should move on to spin , nothing happens. I can only hear a couple clicks. The drive belt is still on place, it drains the water and the filter has recently been cleaned. Any helps appreciated

    January 21, 2020 at 1:09 pm #466025
    Soulfly83
    Participant

    The clicks arnt loud, also for a long time we’ve had to give the door a extra push after closing to get it to lock and washing to start.

    January 21, 2020 at 3:25 pm #466026
    electrofix
    Moderator

    does the drum turn at all ? even on wash ?

    if no check brushes if it has them

    Dave

    January 21, 2020 at 3:28 pm #466027
    Soulfly83
    Participant

    It doesnt turn at all

    January 21, 2020 at 3:57 pm #466028
    iadom
    Moderator

    Definitely, those look like CESET motor brushes like these. https://shop.ukwhitegoods.co.uk/c00296122-washing-machine-carbon-brush

    January 21, 2020 at 8:45 pm #466029
    Soulfly83
    Participant

    I bought a cheap set off amazon, hopefully not made of chocolate. Cheers

    January 21, 2020 at 9:13 pm #466030
    electrofix
    Moderator

    they wont be as good as the gen ones

    keep the loads lower and use only low spin speeds starting at 800 for the first 20 washes to give the brushes a chance to bed in. The non gen brushes need more time to settle in

    Dave

    January 22, 2020 at 1:05 am #466031
    Soulfly83
    Participant

    Sounds like a plan, thanks

    January 23, 2020 at 10:21 pm #466032
    Soulfly83
    Participant

    Ones I got are different, doh

    Similar but different, serves me right for going with cheapest option.

    January 23, 2020 at 10:23 pm #466033
    iadom
    Moderator

    The ones in our online shop are the right ones with the brush ends at the correct angle.

    January 23, 2020 at 11:07 pm #466034
    Soulfly83
    Participant

    https://ibb.co/pnfdy2J

    https://ibb.co/Jqjh9Gz

    Defo same as black ones?

    January 23, 2020 at 11:30 pm #466035
    electrofix
    Moderator

    there not even close, completely different mounting

    if you want a quality part use the gen part linked above

    if you want a cheaper alternative try

    https://shop.ukwhitegoods.co.uk/d240…carbon-brushes

    but I have stopped fitting some pattern parts due to a lowering of quality over the last 10 years

    Dave

    January 23, 2020 at 11:52 pm #466036
    iadom
    Moderator

    Totally different, those are for a Welling motor not a CESET.

    January 28, 2020 at 2:04 pm #466037
    Soulfly83
    Participant

    Bought ones you first recommended, arrived today. Machine is working now. Just put it on a spin. Can it be used as normal now?

    January 28, 2020 at 3:10 pm #466038
    iadom
    Moderator

    If it sounds smooth on spin with no crackling noises then you should be fine.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • You must be logged in to reply to this topic.