beko DIN28Q20 Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › beko DIN28Q20 Dishwasher

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 10, 2020 at 2:34 pm #97312
    dunston
    Participant

    hi. i have a beko DIN28Q20 Pro smart inverter dishwasher with the fault, wash motor not running. the motor will do a small kick/run for a split second. will do this a few times before the heater kicks in. i’m not quite sure of the voltages that are supposed to be going to the wash motor an there is 2 small connectors to the motor. has anyone had any problems withe this model or can shead some light on it please. ive checked the impellor in the motor making sure there are no blockages or jamming of the impellor.

    March 10, 2020 at 5:54 pm #467032
    electrofix
    Moderator

    well judging by the wiring diagram
    the 3 wire connector is low voltage 5v and data
    the 2 wire connector should be mains

    the inverter circuits ar most likely built into the motor

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.