BEKO DW not heating up after tripping fuse

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › BEKO DW not heating up after tripping fuse

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 29, 2020 at 12:53 pm #97389
    CJMylchreest
    Participant

    Hi all,

    Our BEKO dishwasher DIN15210 last night blew the fuse and trip switch mid cycle.

    It still works, but does not heat up when running. I am suspecting thermostat or heater element, but would welcome any advice on what is most likely given what happened. I’m happy to replace either but don’t want to waste loads of time for what is a cheapish DW, and wonder if I should just buy new as I’ve heard people changing everything and it still not working!

    Thanks in advance.
    CJM.

    March 29, 2020 at 1:03 pm #467446
    electrofix
    Moderator

    prob the heater, but you would have to test it to make sure

    https://shop.ukwhitegoods.co.uk/hs81596-compatible-dishwasher-heating-element

    Dave

    March 29, 2020 at 1:11 pm #467447
    CJMylchreest
    Participant

    Thanks Dave – I presume no way to check except fitting the part and trying?

    Cheers.

    March 29, 2020 at 1:12 pm #467448
    electrofix
    Moderator

    only remove connections and test resistance with a multimeter

    Dave

    June 14, 2022 at 4:22 pm #467449
    mr. shr
    Participant

    CJMylchreest wrote:Hi all,

    Our BEKO dishwasher DIN15210 last night blew the fuse and trip switch mid cycle.

    It still works, but does not heat up when running. I am suspecting thermostat or heater element, but would welcome any advice on what is most likely given what happened. I’m happy to replace either but don’t want to waste loads of time for what is a cheapish DW, and wonder if I should just buy new as I’ve heard people changing everything and it still not working!

    Thanks in advance.
    CJM.

    Did you manage to fix this? I have the same problem with the same dishwasher.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.