Neff dishwasher s5444x1gb/08 test procedure

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Neff dishwasher s5444x1gb/08 test procedure

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 30, 2020 at 10:10 am #97394
    Neff Sx5444x1gb/08
    Participant

    Hi trusty dishes washer of 15 yrs has started to play up
    won’t complete a cycle and water doesn’t heat
    did this once before and changed instaneous water heater which fixed it
    checked the heater which had continuity on element but changed it as has other componets on
    this has not fixed it
    looking to see if it has in built test of control module procedure
    new module £200 so would like to confirm a fault on it before ordering
    read about heater relay fault on pcb will, this show in test mode as a fault?
    in the current times can’t get anyone to look at it and have a big family, seem to be spending half the day doing dishes so would like to try and fix it soon
    any help welcomed
    thanks
    rossi

    March 30, 2020 at 10:49 am #467461
    electrofix
    Moderator

    take the timer to bits and check the solder joints on the relay controlling the heater. Common fault on these

    Dave

    March 30, 2020 at 8:28 pm #467462
    Neff Sx5444x1gb/08
    Participant

    Thanks for that
    took control module out bad solder joint in middle of pcb resoldered and re assembled
    Hey Preston fixed and running correctly

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.