- This topic has 6 replies, 3 voices, and was last updated 5 years, 11 months ago by
.
-
Posts
-
my machine was smelling so i disconnected waste / water and electric tipped machine on its side removed the pump cleaned everything put back together now my machine wont start? when i plug it in the load image on the display flashes and nothing else comes up any ideas please?
Not as im aware of , i drained the waste pipe and removed filter bung to release then tipped up, lcd panel lights up, with the image of the load weight a line goes up and down max lights up and it continues to do it bleeping occasionally???
well sound quickly like something has been disturbed when you tilted it
check all wires and connections that may have been pulled when you tilted it
Dave
well whatever way you tipped it and water goes downhill, so try to figure where it could have dripped
dave
Looking from the front of your machine. If you laid the machine down on the right hand side in order to get at the pump which is on the left hand side you may have got some water going up into the pressure switch which for some strange reason has not gone back down its thin pipe. If you disconnect this pipe and blow back down it may well clear any water. Problem might be in the actual p/swt itself. DO NOT BLOW INTO THE P/SWT just let it naturally release any potential water by gravity by waiting an hour or two then reconnect the hose and then retry the machine.
- You must be logged in to reply to this topic.