indesit iwme126

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit iwme126

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 27, 2020 at 10:09 pm #97539
    adv
    Participant

    hi guys hope you are well 😉 this my 5th job in 6 weeks 😡 integrated washer cant open door 2nd 3rd lights flashing ? no water in machine and handle no broken .. help washing stuck in it ?it will wash drain an spin tho :o?

    April 28, 2020 at 9:08 am #468306
    electrofix
    Moderator

    have you turned off the power ?

    this is a standard times lock so cutting power will let it release. if it doesn’t then the lock must have failed

    Dave

    May 7, 2020 at 11:49 am #468307
    adv
    Participant

    yes had power off still wouldn’t open ..over night women just got another machine

    May 7, 2020 at 1:02 pm #468308
    iadom
    Moderator

    Would suggest that it was 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} a broken handle. Not as obvious on built in machines, I always managed to release them with very strong length of nylon cord slotted into the small gap around the door and pulled to the left. A bit of a toil but never failed to open one.

    May 10, 2020 at 7:19 pm #468309
    adv
    Participant

    dont think so pal. handle felt fine/ .done loads and usually just force door open .. pecker brakes off and fit new handle kit.. the 2 middle flashing lights suggest communication error from board ..although might have been the door lock.. all never know now :rolleyes:

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.