Electrolux ESL63010 Tripping Out

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Electrolux ESL63010 Tripping Out

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 3, 2020 at 5:30 pm #97566
    Vpickstock
    Participant

    Hi,
    I have an Electrolux ESL63010 Dishwasher, it’s about 8 years old.
    its recently tripped out the RCD switch on a couple of occasions, today the machine has just died during a cycle.
    it came back on after a while but it died again when I started a cycle again.

    i clean the filters regularly, I’ve checked the fuse and that’s fine too.
    can anyone suggest anything else I can try or advise what the issues might be?

    thanks

    May 3, 2020 at 5:45 pm #468418
    electrofix
    Moderator

    have you checked the socket its plugged into ?

    try a different one

    Dave

    May 4, 2020 at 8:33 pm #468419
    Vpickstock
    Participant

    Hi Dave
    the machine is fully integrated and wired into a switch fused spur, I’ve checked and changed the fuse but that hasn’t worked?
    Is it going to be cheaper to replace the machine or have it repaired?
    thanks
    vic

    May 4, 2020 at 8:49 pm #468420
    electrofix
    Moderator

    still sounds like a power issue

    before you scrap it why not disconnect it from the spur box, ( check for loose wires while your in there ) put a plug on it and try it that way

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.