Dishwasher still stuck on a programme once finished

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Dishwasher still stuck on a programme once finished

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 3, 2020 at 9:15 pm #97569
    Isilves
    Participant

    Beko DW603 dishwasher.Like some help have found that the water leak is due to the build up in the bottom of the machine causing the floater to stop the machine from commencing the programme.Had a electrian check the floater switch it is fine could not found any leaks .Put machine back ran a programme fine but issue came back again .Help please what could be causing the leak

    November 14, 2021 at 1:58 pm #468434
    Barwicked
    Participant

    Did you solve this problem as I have a similar one. It only works again once I remove the dishwasher and tip it 45 degrees.
    thanks

    November 14, 2021 at 2:12 pm #468435
    electrofix
    Moderator

    you will have to run the machine with the front off and watch with a torch for leaks

    Dave

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.