Creda C366e – Main Oven Element Permanently On

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Creda C366e – Main Oven Element Permanently On

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 27, 2020 at 9:38 pm #97703
    Rbz5416
    Participant

    Cooked dinner tonight & when returning the dishes to the kitchen, it was hot in there. Turns out that despite the oven having been turned off, the element was glowing red hot. Powered off at the wall to let it cool down. Just powered on & again it immediately started heating with the element glowing after a very short time. Don’t think I’ve ever seen the element glow in normal use. The fan doesn’t run unless the oven control is turned, same with the light.

    Thoughts please?

    May 27, 2020 at 10:51 pm #469097
    electrofix
    Moderator

    it will be a switchgear problem behind the knob


    Dave

    May 29, 2020 at 11:58 am #469098
    Rbz5416
    Participant

    electrofix wrote:it will be a switchgear problem behind the knob

    Dave

    Thanks Dave.

    As is usual for everything I try to DIY, what I have doesn’t match what I can find online. From a previous adventure with the timer I have a parts diagram, which shows the switch pack in two parts. The main switch appearing to be 6201383, which I have.


    What’s actually fitted to the cooker looks nothing like that. It’s actually part ET510001/J5, which seems to largely be described as a complete thermostat for Cannon. But I’ve ordered it anyway so we’ll see what happens!

    May 29, 2020 at 2:14 pm #469099
    electrofix
    Moderator

    there copuld be a mod somewhere where a single switch is changed for 2 seperates

    could not look it up as need more numbers off it

    Dave

    May 29, 2020 at 6:27 pm #469100
    Rbz5416
    Participant

    electrofix wrote:there copuld be a mod somewhere where a single switch is changed for 2 seperates

    could not look it up as need more numbers off it

    Dave

    Here’s the model plate. Judging by what looks like a date code on the thermostat it looks to have been built in 2004. According to another spares site the ET50001/J5 was fitted from “Date code 26” but no idea how that relates.

    May 29, 2020 at 7:09 pm #469101
    electrofix
    Moderator

    date code 26 should be feb 04

    hotpoint site shows this as correct for your model
    https://parts.hotpoint.co.uk/product/model_C366EKH/Thermometers/J00144106


    Dave

    May 31, 2020 at 9:07 am #469102
    Rbz5416
    Participant

    electrofix wrote:date code 26 should be feb 04

    hotpoint site shows this as correct for your model
    https://parts.hotpoint.co.uk/product/model_C366EKH/Thermometers/J00144106


    Dave

    Thanks, the date ties in with the date on the part. That Hotpoint part looks the same as what I’ve ordered from you, so should be good.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.