Hotpoint Style FDYF 1100

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint Style FDYF 1100

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 1, 2020 at 12:19 pm #97729
    ChrisH01
    Participant

    Hello,

    I have a Hotpoint style FDYF 1100 dishwasher, which has been working fine until the last week or so. Recently the machine has decided to not run through a full cycle, we’ll load the machine, select a wash and the machine will start, it appears to be working fine for between ten and fifteen minuets, then it’ll time jump itself to finish the wash. On opening the door the load is wet and the water has drained, the tablet door is open and there is a tablet half dissolved along with a load of dirty wet crockery.

    Can anyone assist in helping me identify the cause/issue here?

    Thank you

    June 1, 2020 at 10:02 pm #469224
    electrofix
    Moderator

    does it heat ?

    Dave

    June 2, 2020 at 8:20 am #469225
    ChrisH01
    Participant

    electrofix wrote:does it heat ?

    Dave

    Dave,

    It doesn’t appear to heat.

    Thank you

    Chris

    June 2, 2020 at 8:23 am #469226
    electrofix
    Moderator

    well thats your first thing to check

    you need to measure the element to see if its blown

    Dave

    June 2, 2020 at 8:33 am #469227
    ChrisH01
    Participant

    electrofix wrote:well thats your first thing to check

    you need to measure the element to see if its blown

    Dave

    Excuse my lack of knowledge, how do I do this?

    Thank you

    Chris

    June 2, 2020 at 10:05 am #469228
    electrofix
    Moderator

    you would need a multimeter on ohms scale
    you would have to remove the plug and find the heater unit on the end of the wash motor, remove the plug and test it for resistance which will be under 100 ohms

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.