Hotpoint EG902GX Dual Fuel Range Cooker

Home Forums Trade Technical & Spare Parts Forums Hotpoint EG902GX Dual Fuel Range Cooker

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #97757
    mjhservices
    Participant

    Does anyone one know how to access the clock and selector switch on these? I can not see how to remove anything on this particular range to access anything.

    #469344
    kaibart
    Moderator

    Take all control knobs off open grill door and there is 3 screws holding facia on from there should be straight for8hope this helps you

    #469345
    mjhservices
    Participant

    Thank you for your reply but I did take off the 3 screws but the control panel was solid? and looked as if it was tucked under the hob top and that had to come off as well?

    #469346
    kaibart
    Moderator

    No when you have screws off it slide to the left I think no screws you should be able to change timer clock dont know about accessing switch side panel might need to come off for that

    #469347
    mjhservices
    Participant

    Thanks for your reply. Regards Mark

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.