Cooling fan help

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Cooling fan help

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 14, 2020 at 9:32 am #98014
    Chris Mac
    Participant

    Hi i have an HAE60K cooker where the cooling fan doesn’t stop running. I have changed the cut-in 65 deg part but this hasn’t cured the problem. Do i just need a new cooling fan.
    Thanks Chris

    July 14, 2020 at 10:41 pm #470568
    electrofix
    Moderator

    no
    if you changed the fan stat and it still runs it will be the grill control switch

    Dave

    July 15, 2020 at 5:24 am #470569
    Chris Mac
    Participant

    Hi is that the top oven selector switch? Do you know the part number thanks

    July 15, 2020 at 10:04 am #470570
    electrofix
    Moderator

    for that i need more info

    there are 3 cookers with the above model no in its description

    to tie it down to one cooker i need the rest of the info off the label inside the door

    there should be a complete model number, A commercial code and a serial no

    Dave

    July 15, 2020 at 9:36 pm #470571
    Chris Mac
    Participant

    Hi Dave
    Heres the info off the label
    Cucina hae60k
    S/n 20287752. 25691310000

    Thanks for your help

    July 15, 2020 at 10:38 pm #470572
    electrofix
    Moderator

    very likely C00270066 but you need to double check

    https://parts.hotpoint.co.uk/product/model_HAE60K/control{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20knobs/J00172913

    but if it is an open switch you can check for seized contact so i would check that first

    Dave

    July 24, 2020 at 4:01 pm #470573
    Chris Mac
    Participant

    Hi Dave,
    I went and fitted the new switch today but the issue is still there. The cooling fan doesn’t stop running.
    On the end of the old switch was another one that was fitted to the switch, this one I just pulled off and replaced into the new one. Could this be the faulty one? And not the actual main control switch
    Thanks Chris

    July 24, 2020 at 4:15 pm #470574
    electrofix
    Moderator

    cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure of the diagram i have for your unit because i am not getting a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} match for the models etc

    but the one i am looking at has 3 ways of turning the fan on

    there is a stat with both ovens with the main oven it will be down the back somewhere
    plus the switch you just changed ( i did say to check first)

    all you have to do is find this stat and pull one wire off, Insulate it and switch on. if the fan has stopped thats the one

    Dave

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.