White Knight 767C Capacitor

Home › Forums › Public Support Forums › General Enquiries And Questions › White Knight 767C Capacitor

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 19, 2020 at 10:51 am #98040
    WalterB
    Participant

    I am trying to replace the capacitor on a White Knight 767C drier but I am struggling to figure out how to get into the machine to get at the capacitor. Anyone know how to do this? Also does anyone have a service manual for this drier? I can’t find one online.

    July 19, 2020 at 12:52 pm #470679
    electrofix
    Moderator

    a lot of white knight condensor dryers can be difficult to get at the capacitor

    you have to remove the fan which if stuck can break if rusted on

    then remove the cover and the chamber behind it.

    Dave

    July 19, 2020 at 1:18 pm #470680
    WalterB
    Participant

    Thanks Dave, that’s through the back, right?

    July 19, 2020 at 1:49 pm #470681
    WalterB
    Participant

    I’ve taken the back and fan off and I can see the capacitor behind the fan housing. But I can’t see how to get the fan housing off to get at the capacitor. Any suggestions?

    July 19, 2020 at 2:07 pm #470682
    electrofix
    Moderator

    undo screws there are 2 slide out metal things holding it together on the right one top and bottom

    Dave

    post pic if your not sure

    July 19, 2020 at 3:24 pm #470683
    electrofix
    Moderator

    yes thats right
    undo the screws that hold the housing to the motor. in fact you may not have to undo those screw as they only hold the seal i think so follow the housing along to the right and there are 2 stainless “C” clips pushed on, one top one bottom. These have to be slid off to remove housing. note one is longer than the other

    Dave

    July 19, 2020 at 3:49 pm #470684
    WalterB
    Participant

    Thanks Dave. That worked.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.