Electrolux Oven door wont’ close

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Electrolux Oven door wont’ close

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • July 26, 2020 at 6:49 pm #98075
    EvPow
    Participant

    Hi I have an electrolux oven and the door will not close. It is only a year and a half old. Can anyone suggest how to fix it?

    July 26, 2020 at 7:40 pm #470777
    electrofix
    Moderator

    post the model, serial no and pnc number so we can see which unit it is

    Dave

    July 26, 2020 at 9:42 pm #470778
    EvPow
    Participant

    Thanks. It is an Electra, the model is TCR60B the type is DE66C0801E16C1. The serial no is 00684750007604490088

    July 26, 2020 at 10:37 pm #470779
    electrofix
    Moderator

    so its not electrolux with that serial its a cheap import from a turkish manufacturer called Vestel

    when you say the door wont close is it getting to within 10mm or so then stoppng and only closes if you push it ?

    Dave

    July 27, 2020 at 8:35 am #470780
    EvPow
    Participant

    It doesn’t close at all, it seems not to catch. As I push it closed, the peg goes in but does not engage and therefore the oven door won’t close.

    July 27, 2020 at 8:45 am #470781
    electrofix
    Moderator

    oh i see its that type
    inside the door is a roller catch
    https://shop.ukwhitegoods.co.uk/c00230901-oven-roller-door-catch (this is not the correct one for your oven )

    this locks the door

    you need to source a new one
    try contacting the site shop with all those numbers and see if they stock one

    July 27, 2020 at 4:10 pm #470782
    EvPow
    Participant

    Thankyou for your help. They sent me a link to this website: https://shop.ukwhitegoods.co.uk/37007702-genuine-oven-door-lock
    Would that be relatively easy to replace ?

    July 27, 2020 at 5:54 pm #470783
    electrofix
    Moderator

    all depends which way round things are
    is the pin on the door or the frame ?

    Dave

    July 27, 2020 at 7:17 pm #470784
    EvPow
    Participant

    Hi
    The pin is on the frame

    July 27, 2020 at 7:21 pm #470785
    electrofix
    Moderator

    no problem then you need to take the door to bits

    way hoping it was that way round its a lot easier

    Dave

    July 27, 2020 at 10:30 pm #470786
    EvPow
    Participant

    thankyou so much for the advice. I looked again at the door and realised there were screws missing from underneath and one missing on the roller catch. Managed to take it apart and I managed to get the oven door closed…don’t know how long it will last but delighted to fix it. Thanks again.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.